A concrete roof structure panel that can be combined with other non-combustible materials to create floor-to-ceiling assemblies with a 1 hour and 2 hour fire resistance rating • Robust and durable concrete panel; high lift resistance fixed with screws • Meets the criteria of ASTM E136 standard and can be used in all types of construction incombustible Descriptions structural panels for concrete roof CGC are mechanically fastened to cold-bent steel joists or framing members. This roof system is designed to support the loads due to gravity and lateral loads. Roofing membranes can be applied directly to CGC’s concrete roof structure panels. CGC’s concrete roof structure panels can withstand a total load, overload and permanent load of up to 7.2 k Pa (150 lb.). / ft2) on a cold-bent steel frame spaced 1220mm (48 “) apart. CGC Concrete Roof Structure Panels have a linear variation with humidity changes of less than 0.10%. In other words, the panels will not undergo deformation or warping, such as coatings on frame bois.Pour cut structural panels for concrete indexes • Stable panel in dimension that will not deform or warp like wood-frame claddings; no mold problem like structural concrete • Quick and easy to install; the panel is cut using a circular saw and roof GSC, use a circular saw with a carbide tipped blade and a dust collector to reduce the amount of dust in the air. Panels are also fixed using standard methods, using a screwdriver and 8-gauge self-drilling screws. Due to the exceptional durability of the panels, they can be installed in most weather conditions, including low rainfall. (rain or snow) and temperatures from -18 ° C (0 ° F) to 52 ° C (125 ° F) .RESTRICTIONCGC Concrete Roof Structural Panels should not be left in service without a coating of appropriate roof membrane.INSTALLATION For the best intended result, CGC Concrete Roof Structural Panels must be installed in accordance with CGC specifications, using only the listed materials and components. As with all types of construction, appropriate safety procedures must be observed to protect installers against personal injury caused by improper lifting, falling or irritation of the eyes, hands and lungs. Precautions when placing CGC concrete roof panel pallets on roof framing. A pallet of CGC Concrete Roof Structures (20 x 1920 x 1220 x 2440 mm [3/4 “x 4 ‘x 8’]) panels weighs approximately 1,542 kg (3,400 lbs). Do not exceed limits when placing pallets or panels over open structure or complete roof assemblies. Store units close to bearing walls where the joists meet the mur.Utiliser a concrete structure of panel screws No. 8 1 5/8 inch (minimum length) thin head (or flared) and a GrabberGardMD finish to secure the panels concrete roof structure from CGC to cold-rolled steel. To mechanically fasten the roof system, only use corrosion resistant fasteners that are compatible with the concrete.Our services for Ready Made Roofs and Boundary Walls
For more Details:www.hanjra.com.pk
